Compile Bitcoin on Ubuntu 14.04 · GitHub

Make your own stakebox. Ultimate beginners guide how to compile any wallet on AARCH64 (Raspbery pi and other SBC)

I contemplated to wrote this for a long time, so it's finally time.
As you know a lot of altcoins uses PoS (Proof-of-stake) way of "mining" coins. Which basically means, that you hold coins on your unlocked wallet and you are receiving stakes as a reward. This requires very little power and it can bring you a lot of rewards, at just 10W from the wall.
So first I am using latest Raspbian on RPI4B 4GB in this example.Setting up Raspbian is not part of this process since it's very well documented. I recommend to change user from pi to something else due to security concerns and you can also do other stuff just search "security Raspberry PI" and you find a lot of articles, but this is not the focus of this guide.
I know there are a lot of guides on the internet, but I am using like 5 sources, so it's compiled what other people wrote and some of my research.
I am using AnyDesk insted of SSH or VNC server, because it works it's ligthweit and it just works.
So after you see the gui of Raspbian, just launch terminal (CTRL + ALT + T) and do basic thing:
sudo apt-get update && sudo apt-get upgrade
Than press Y and let it run, after is finished, we need to prepare so dependency packages. Since most of the wallets using Berkeley DB 4.8 we need to obtain it.
So in terminal wrote:
cd cd Downloads wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar -xzvf db-4.8.30.NC.tar.gz cd db-4.8.30.NC/build_unix ../dist/configure --enable-cxx make sudo make install 
So wait unti it's finished and than you can delete files in Downloads folder in gui or use:
sudo rm -r [folder] 
So next thing we need to install some libraries.
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev 
And pres y and let it run. After that another set of libraries:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++- dev libminiupnpc-dev qt5-default 
And then again pres y and let it run. Some wallets need older version of libssl1.0-dev, so for for safe compiling we install that as well:
sudo apt-get install libssl1.0-dev 
Pres y and let it run. Warning don't use sudo-apt get autoremove, since it would wipe this package, since it's old.
Next thing we are going to obtain Bitcoin PPA filest, which can be done like this.
cd /etc/apt/sources.list.d/ sudo nano bitcoin.list 
Paste this in there:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main 
And CTRL+X and than y, then do this:
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E sudo apt-get update 
So now we are ready for compiling. So we are going create folders. CD yourself where this folder should be situated, if you for example have plugged in some external drive. Then:
mkdir Crypto cd Crypto 
And then we have to choose wallet which you want to compile. I am choosing Streamies (STRMS) as an example, since it's pretty good coin for staking. So:
mkdir Streamies cd Streamies 
Then go to the github page and click on the green button on the left and click copy to clipboard, which gives you git link.
git clone https://github.com/Streamies/Streamies.git 
Watch the output folder which it creates, it's stated in the first two lines and copy then by highliting the text and CTRL+SHIFT+C copy it to your clipboard.
cd Streamies (this is that git created folder) ./autogen.sh ./configure CPPFLAGS="-I/uslocal/BerkeleyDB.4.8/include -O2" LDFLAGS="-L/uslocal/BerkeleyDB.4.8/lib" sudo make (this could take hours) sudo make install 
And you are done, files is going to be in folder /uslocal/bin (DO NOT delete git created folder, because you are going to need it for faster compiling, when wallet get's and update.)
cd /uslocal/bin 
Now you can list files by:
ls 
And then you can copy/move them where ever you want by using:
sudo mv * [destination full path] 
Let it run and go back to folder where you move those files.
sudo chmod +x streamies-qt (since we want to run wallet) 
In most cases compiled files are going to in format of "shared library" so we need to create script to run it. Open up a text editor from gui or through nano. And paste this to that file:
#!/bin/bash ./streamies-qt 
And save it as a sh file, for example run.sh. Then we need to make it runnable so:
sudo chmod +x run.sh 
Now to run it, it's just:
./run.sh 
And here we are glorious GUI wallet appears and you are done, you can paste blockchain, wallet.dat from other sources, so this migration is pretty easy and you, if you have it on for exaple flash disk.
So this is basic how to compile QT wallets on AARCH64. I am running 7 wallets, 2 of those are Masternodes and RPI 4B 4GB would handle way more, I am at best on half of my RAM.
Some wallets need more package, but it's not much of and issue, since compiling stops and you just copy paste nape which is missing put it in the google and add "apt-get" after the name of package and you are going to see, what is the name of the packages so it can be retreived from package assinstant aka apt-get. So basically:
sudo apt-get install [package name] 
Then press y and again wrote:
sudo make 
This process is going to continue where it was left off, so nothing is going to run from beginning.
Updating wallets is basically exactly same, just repeat steps from "git clone" and after that proceed as it was written above.
So I hope this helps some of you, to use this at home and not on some VPS, if you are anxious as me, to host my wallets on remote server.
submitted by M1chlCZ to CryptoCurrency [link] [comments]

What is the stable version?

I just compiled bitcoin cash from source, version 0.21.11, and it when I do getblockchaininfo I get the warning:
"warnings": "This is a pre-release test build - use at your own risk - do not use for mining or merchant applications"
So I tried with 0.21.10, 0.21.9, and even 0.21.8. They all give the same warning!
Here's what I did (on Ubuntu 20.04):
apt-get update
apt-get upgrade -y
apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-test-dev libboost-thread-dev git bsdmainutils build-essential libssl-dev libevent-dev ninja-build python3 cmake libjemalloc-dev libminiupnpc-dev libdb-dev libdb++-dev libzmq3-dev -y
git clone https://github.com/Bitcoin-ABC/bitcoin-abc --branch v0.21.11 --single-branch
(cd bitcoin-abc && mkdir build && cd build && cmake -GNinja -DBUILD_BITCOIN_QT=OFF .. && ninja && strip src/bitcoind && strip src/bitcoin-cli && strip src/bitcoin-tx && ninja install)
What am I doing wrong? I am planning on mining so I am concerned by this warning.
submitted by bithire to Bitcoincash [link] [comments]

How to get Energi Wallet running on Raspberry Pi 4

How to get Energi Wallet running on Raspberry Pi 4
Hello,
I'm new to the Raspberry Pi and trying to get the NRG Core Cryptocurrency wallet running on my Raspberry. Finally I was able to compile the files after this commands:
Download and install the newest updates sudo apt-get update && sudo apt-get upgrade
Install the following major dependencies packages sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev
Install the following QT dependencies packages sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++-dev libminiupnpc-dev qt5-default
Install bitcoin PPA files cd /etc/apt/sources.list.d/
sudo nano bitcoin.list
Add this line to the file: deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main
Close file
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E
sudo apt-get update
Clone Github cd git clone https://github.com/energicryptocurrency/energi.git
Install Libdb4.8 Libdb4.8-dev Libdb++ Libdb4.8++-dev
Compile the wallet cd energi ./autogen.sh ./configure --with-boost-libdir=/uslib/arm-linux-gnueabihf make sudo make install
After compiling I see the files in /uslocal/bin
https://preview.redd.it/25m1nm8164k41.jpg?width=2016&format=pjpg&auto=webp&s=3dfec55b307187eea06a279e284a19a6ae5d6d37
No I need to know how to use this files? Can someone help me please?
submitted by FCU4ever to energicryptocurrency [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

[IDEA] [PROPOSAL] Monero Debian (deb) packages / Debian package repository deb.getmonero.org (I can do)

I have the skills to implement this if wanted.
Possible User Experience
This is a proposal, i.e. not implemented yet. Instructions for users, simplified.
How to install monero using apt-get
Download the repository signing key.
wget https://www.getmonero.org/monero.asc
Add the signing key.
sudo apt-key --keyring /etc/apt/trusted.gpg.d/monero.gpg add ~/monero.asc
Add APT repository.
echo "deb https://deb.getmonero.org buster main" | sudo tee /etc/apt/sources.list.d/monero.list
Update your package lists.
sudo apt-get update
Install monero.
sudo apt-get install monero
A few technical implementation details
I would simply grab the binaries provided by getmonero.org, download them, check software (gpg) signatures, put these into deb packages, add these to a repository, and upload the repository.
What I would not do is creating the binaries during package creation. While this is nice to have, it doesn't help user experience and blocks the progress on reaching this goal. See next chapter.
Why simply put the pre-build Monero binaries into a deb package?
1) After bitcoin existing for more than 10 years, being popular and being in Debian unstable (sid) it still never made its way into Debian testing, let alone stable. Reason being explained that a difference in underlying libraries (even just security fixes) during compilation may result in a network split. Binaries compiled during packaging on different versions of Linux distributions might have different libraries that might cause a network fork / chain split.
References:
(Note: above website saying Tags: fixed-upstream is probably a mistake as discussion at bottom says.)
2) The github issue of packaging monero stalled.
3) By shipping the same binaries as provided by getmonero.org reduces the chances of introducing a backdoor.
Many Options
Timeline
Doable quickly. The electrum (bitcoin) AppImage was recently added to a Debian package (binaries-freedom) by me and is now easily installable in Whonix. Pre-installed in testers version of Whonix already.
About Me
I am the founder of Whonix, which I am maintaining at present for more than 7 years.
Whonix (formerly TorBOX) is a Debian GNU/Linux–based security-focused Linux distribution. It aims to provide privacy, security and anonymity on the internet.
You can see an overview of packages I am maintaining on my github profile.
To proof that this forum account adrelanos corresponds the same person maintaining whonix.org, it is added here.
Questions
What happened to, what is the successor of the forum funding system?
submitted by adrelanos to Monero [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

How to install any QT-Wallet on the Raspberry Pi / Pi3B+

Hello and welcome to my first tutorial. Today I will show you how to install almost any QT-wallet on the RaspberryPi. I hope this tutorial will help you. I use the BankSocietyCoin in this tutorial, you can change it also to your fav. Coin.

Install Raspbian , *Buster produced a lot of failures on my system while compiling Wallets*
(my version: https://downloads.raspberrypi.org/raspbian/images/raspbian-2018-03-14/ )
Run the following commands:

Change Swap Size of the Rasp:

sudo nano /etc/dphys-swapfile
change to CONF_SWAPSIZE=2048
press: ctrl o Enter and ctrl x
enable the swap file with its new size:
sudo dphys-swapfile setup
sudo dphys-swapfile swapon
----------
Install Required Dependencies:

apt-get update
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev
and
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++-dev libminiupnpc-dev qt5-default
----------
Install bitcoin PPA files for the compiling process:

cd /etc/apt/sources.list.d/
sudo nano bitcoin.list
paste to following line:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main
press: ctrl o Enter and ctrl x
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E
sudo apt-get update
----------
Install working libssl:

cd && sudo apt-get remove libssl-dev
sudo nano /etc/apt/sources.list
change stretch to jessie
press: ctrl o Enter and ctrl x
sudo apt-get update
sudo apt-get install libssl-dev
sudo apt-mark hold libssl-dev
sudo apt-mark hold libssl1.0.0
sudo nano /etc/apt/sources.list
Change jessie" back to stretch
press: ctrl o Enter and ctrl x
sudo apt-get update
----------

Compile and Install BerkeleyDB 4.8.30 :

wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz
sudo tar -xzvf db-4.8.30.NC.tar.gz
cd db-4.8.30.NC/build_unix
sudo ../dist/configure --enable-cxx
sudo make
sudo make install
export CPATH="/uslocal/BerkeleyDB.4.8/include"
export LIBRARY_PATH="/uslocal/BerkeleyDB.4.8/lib"
----------

The wallet:

(my way) mkdir wallets , cd wallets
git clone https://github.com/RGPickles/BankSocietyCoin
cd BankSocietyCoin
chmod 755 src/leveldb/build_detect_platform
chmod 755 src/secp256k1/autogen.sh
cd src/
make -f makefile.unix
./societyd
* for qt wallet*
cd ..
qmake
make
edit society.conf in .society
(rpcuser=SomeCoolRandomUsername
rpcpassword=SOMETHINawesomeYOUdontHaveToRemember
rpcconnect=127.0.0.1
save.
./society-qt
----------

Have fun!
for a Beer - Donations ;)
SOCI - Si6V7EwnJqzmFiNGHSbXrtWUXKH6F4EFm3
BTC - 1HpGF4wMzztpJ4KT4o2ySFvnLJ4gCoYaV5
LTC - LS22MgY9G4KbaKhkR5dFi995MbcQhuyDXW
ETH - 0x6b5EdC3e58Fd84a40aa942964690adA91C398075
TRX - TKBpktt5QQ9WV57QjonQrGr1vmKLCVQBL6

13.07.2019 DennisHilk




**********
if error (makefile.unix:200: obj/rpcclient.o] appears)
[This first step is necessary because you will get linking errors if you don't remove the old Boost library]
sudo apt remove --purge --auto-remove libboost-dev libboost-thread-dev libboost-system-dev libboost-atomic-dev libboost-regex-dev libboost-chrono-dev
mkdir boost
cd boost
wget https://dl.bintray.com/boostorg/release/1.64.0/source/boost_1_64_0.tar.gz
tar xfz boost_1_64_0.tar.gz (can take rly long, dont worry)
cd boost_1_64_0/
./bootstrap.sh
./b2 stage threading=multi link=static --with-thread --with-system
sudo ./b2 install threading=multi link=static --with-thread --with-system
cd ../../
nano .bash_profile
export LIBS="-L/home/YOURS/boost/boost_1_64_0/stage/lib"
export CPPFLAGS="-I/home/YOURS/boost/boost_1_64_0"
cd society root
make clean
cd src
sudo make -f makefile.unix

(if bignum error)
sudo apt-get install libgmp-dev
or delete opensll and reinstall as above.
submitted by dennishilk to u/dennishilk [link] [comments]

Walk through of how to claim BCD Bitcoin Diamond

I am completely naive when it comes to Linux, coding, compiling, etc., so I found it difficult to follow advice I found for compiling the bitcoin diamond code form git. I followed a few guides for bitcoin core first and could never get it to work. I got some help from someone that knows Linux and here's what finally worked for me with BCD.
Use rufus to make bootable usb with ubuntu iso. (https://rufus.akeo.ie/)
Boot from the usb and install ubuntu.
Follow this guide to compile bitcoin from git: https://www.toshblocks.com/bitcoin/compile-bitcoin-source-code-ubuntu-16-04-lts/
Do the entire guide with bitcoin core to ensure everything is working.
Make sure you replace "theusername" with your own each time it appears, or make "theusername" your user name from the beginning.
There was one small difference, at the end of the guide to run bitcoin-qt it is ./src/qt/bitcoin-qt
At the end when trying to run bitcoin-qt (./src/bitcoin-qt) it said there was no such file, which made me think that I did something wrong but you just have to find where the file is. Hey, I said I was a complete noob, go easy on me.
When you repeat the procedure for BCD there will be a few small changes:
git clone https://github.com/bitcoin/bitcoin.git
becomes
git clone https://github.com/eveybcd/BitcoinDiamond.git
mkdir bitcoin/db4/
becomes
mkdir BitcoinDiamond/db4/
../dist/configure --enable-cxx --disable-shared --with-pic --prefix=/home/theusername/bitcoin/db4/
becomes
../dist/configure --enable-cxx --disable-shared --with-pic --prefix=/home/theusername/BitcoinDiamond/db4/
./configure LDFLAGS="-L/home/theusername/bitcoin/db4/lib/" CPPFLAGS="-I/home/theusername/bitcoin/db4/include/"
becomes
./configure LDFLAGS="-L/home/theusername/BitcoinDiamond/db4/lib/" CPPFLAGS="-I/home/theusername/BitcoinDiamond/db4/include/"
when you get to this line: [email protected]:~/BitcoinDiamond$ ./autogen.sh
I got the following error:
bash: ./autogen.sh: Permission denied
this command will show some information about autogen.sh
[email protected]:~/BitcoinDiamond$ ls -l autogen.sh
-rw-rw-r-- 1 mmmmm mmmmm 527 Dec 30 21:26 autogen.sh
same command comparing it to the bitcoin core version of autogen.sh
$ ls -l ../bitcoin/autogen.sh
-rwxrwxr-x 1 mmmmm mmmmm 527 Dec 30 21:03 ../bitcoin/autogen.sh
do this to make them the same
[email protected]:~/BitcoinDiamond$ chmod a+x autogen.sh
recheck autogen.sh and it should match the bitcoin core autogen.sh now
[email protected]:~/BitcoinDiamond$ ls -l autogen.sh
-rwxrwxr-x 1 mmmmm mmmmm 527 Dec 30 21:26 autogen.sh
continue on
[email protected]:~/BitcoinDiamond$ ./autogen.sh
[email protected]:~/BitcoinDiamond$ ./configure LDFLAGS="-L/home/mmmmm/BitcoinDiamond/db4/lib/" CPPFLAGS="-I/home/mmmmm/BitcoinDiamond/db4/include/"
[email protected]:~/BitcoinDiamond$ make -s -j5
It will work a while and then you'll get the following error, among others:
/bin/bash: ../share/genbuild.sh: Permission denied
It's the same error as with autogen.sh, so find it and fix it by the following:
[email protected]:~/BitcoinDiamond$ find . -name genbuild.sh ./share/genbuild.sh
[email protected]:~/BitcoinDiamond$ chmod a+x ./share/genbuild.sh
continue on by restarting make
[email protected]:~/BitcoinDiamond$ make -s -j5
It should be good!
go to and run bitcoin-qt to start the gui
[email protected]:~/BitcoinDiamond/src$ cd qt
[email protected]:~/BitcoinDiamond/src/qt$ ./bitcoin-qt
bitcoin-wt will spend some hours syncing the entire blockchain so you have to wait.
When it is finished, import private keys by:
clicking in the "Bitcoin Core - Wallet" window to make it active
hover mouse in top left of the grey bar on the top of the deskto screen, not the "Bitcoin Core - Wallet" until it says "file settings help"
click on "help"
click on "Debug Window"
click on the "Console" tab
enter "importprivkey 5KJvsngHeMpm884wtkJNzQGaCErckhHJBGFsvd3VyK5qMZXj3hS" with your own key
make an account at gate.io where they are allowing deposits
sell!, or don't, maybe you're nuts, who am I to judge
submitted by Ozmodiar to BitcoinAirdrops [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

[Reupload][Tutorial] Install Armory Wallet 0.96.4 on Fedora Workstation 29

note: I had to reupload this because reddit is banning my original account for no reason. I appealed but I thought maybe someone wanted to have this content online.
Armory is a very cool open source bitcoin wallet for the power user. You can do neat things with it, read here: https://www.bitcoinarmory.com/
Disclaimer: follow these steps at your own risk. I am not responsible for any damage / loss of funds you might face for following or not following correctly my instructions here. I may have made a typo somewhere or be wrong so do your own research and learn for yourself what I am doing at each step, and what consequences may have for you, at your own risk. These instructions may be wrong somewhere. It worked for me, it doesn't mean it has to work for you.
Requirements for this tutorial:
We are going to build the code from source.
Install dependencies.
I followed these instructions to find the equivalent Fedora packages:
Open the terminal app and run this command:
sudo dnf install git nano qt qt-devel python-devel libtool pyqt4 pyqt4-devel lmdb swig 
And more python packages that I had to install:
sudo pip install twisted qt4reactor psutil 
Importing the signing key to verify the software
Install KGPG to easily manage keys.
sudo dnf install kgpg 
Go to
https://keyserver.ubuntu.com/pks/lookup?op=get&search=0x8C5211764922589A
and copy paste the code below the title from
-----BEGIN PGP PUBLIC KEY BLOCK-----
to
-----END PGP PUBLIC KEY BLOCK-----
both included. Then open KGPG from terminal with
kgpg -k 
and click 'Import Key...' > Clipboard > Ok . You should see a confirmation message. Double check the info and close the dialog.
Repeat the process with this other key:
https://keyserver.ubuntu.com/pks/lookup?op=get&search=0xA4FC919E85C595BA
You can verify both keys are mentioned at the Armory webpage.
Clone and compile the code plus some edits
Before, we installed some dependencies that are named differently than the equivalent Ubuntu/Debian package specified at the Armory documentation. The build process fails for Fedora as the name for the dependency during checks won't match the Fedora version. There's this pull request addressing that, but the code is not part of any release yet.
So the fastest workaround (maybe a bit dirty) was to edit the build config file and correct the name for my Fedora install. Let's begin.
Clone the Armory repository
git clone https://github.com/goatpig/BitcoinArmory.git 
Enter the BitcoinArmory dir
cd BitcoinArmory 
Switch to release code
git checkout 'v0.96.4' 
Verify commit signature
git tag -v 'v0.96.4' 
you should see the following message:
> object fee1f91a3137ef1056e15cc606a186b0e508f84c > type commit > tag v0.96.4 > tagger goatpig  1522530739 +0200 > > v0.96.4 > gpg: Signature made Sat 31 Mar 2018 11:12:19 PM CEST > gpg: using RSA key 8C5211764922589A > gpg: Good signature from "goatpig (Offline signing key for Armory releases) " > gpg: WARNING: This key is not certified with a trusted signature! > gpg: There is no indication that the signature belongs to the owner. > Primary key fingerprint: 745D 707F BA53 968B DF63 AA8D 8C52 1176 4922 589A 
if it looks the same, everything is ok.
Edit the file 'Makefile' file with
gedit Makefile 
And click the three dot menu > Find and Replace...
Configure the options as follows:
https://i.imgur.com/hpS01Kd.png
Click Replace All and close.
Go back to the terminal and run the following commands in order from inside the BitcoinArmory dir. Wait for the previous one to finish before running the next one:
./autogen.sh 
...
./configure 
...
make 
if everything finishes without error you are all done! Run this to start Armory:
python ./ArmoryQt.py 
you are all set. Please let me know if I missed something.
submitted by RedditShadowbangedMe to Bitcoin [link] [comments]

[Tutorial] Install Armory Wallet 0.96.4 on Fedora Workstation 29

Armory is a very cool open source bitcoin wallet for the power user. You can do neat things with it, read here: https://www.bitcoinarmory.com/
Disclaimer: follow these steps at your own risk. I am not responsible for any damage / loss of funds you might face for following or not following correctly my instructions here. I may have made a typo somewhere or be wrong so do your own research and learn for yourself what I am doing at each step, and what consequences may have for you, at your own risk. These instructions may be wrong somewhere. It worked for me, it doesn't mean it has to work for you.
Requirements for this tutorial:
We are going to build the code from source.
Install dependencies.
I followed these instructions to find the equivalent Fedora packages:
Open the terminal app and run this command:
sudo dnf install git nano qt qt-devel python-devel libtool pyqt4 pyqt4-devel lmdb swig 
And more python packages that I had to install:
sudo pip install twisted qt4reactor psutil 
Importing the signing key to verify the software
Install KGPG to easily manage keys.
sudo dnf install kgpg 
Go to
https://keyserver.ubuntu.com/pks/lookup?op=get&search=0x8C5211764922589A
and copy paste the code below the title from
-----BEGIN PGP PUBLIC KEY BLOCK-----
to
-----END PGP PUBLIC KEY BLOCK-----
both included. Then open KGPG from terminal with
kgpg -k 
and click 'Import Key...' > Clipboard > Ok . You should see a confirmation message. Double check the info and close the dialog.
Repeat the process with this other key:
https://keyserver.ubuntu.com/pks/lookup?op=get&search=0xA4FC919E85C595BA
You can verify both keys are mentioned at the Armory webpage.
Clone and compile the code plus some edits
Before, we installed some dependencies that are named differently than the equivalent Ubuntu/Debian package specified at the Armory documentation. The build process fails for Fedora as the name for the dependency during checks won't match the Fedora version. There's this pull request addressing that, but the code is not part of any release yet.
So the fastest workaround (maybe a bit dirty) was to edit the build config file and correct the name for my Fedora install. Let's begin.
Clone the Armory repository
git clone https://github.com/goatpig/BitcoinArmory.git 
Enter the BitcoinArmory dir
cd BitcoinArmory 
Switch to release code
git checkout 'v0.96.4' 
Verify commit signature
git tag -v 'v0.96.4' 
you should see the following message:
> object fee1f91a3137ef1056e15cc606a186b0e508f84c > type commit > tag v0.96.4 > tagger goatpig  1522530739 +0200 > > v0.96.4 > gpg: Signature made Sat 31 Mar 2018 11:12:19 PM CEST > gpg: using RSA key 8C5211764922589A > gpg: Good signature from "goatpig (Offline signing key for Armory releases) " > gpg: WARNING: This key is not certified with a trusted signature! > gpg: There is no indication that the signature belongs to the owner. > Primary key fingerprint: 745D 707F BA53 968B DF63 AA8D 8C52 1176 4922 589A 
if it looks the same, everything is ok.
Edit the file 'Makefile' file with
gedit Makefile 
And click the three dot menu > Find and Replace...
Configure the options as follows:
https://i.imgur.com/hpS01Kd.png
Click Replace All and close.
Go back to the terminal and run the following commands in order from inside the BitcoinArmory dir. Wait for the previous one to finish before running the next one:
./autogen.sh 
...
./configure 
...
make 
if everything finishes without error you are all done! Run this to start Armory:
python ./ArmoryQt.py 
you are all set. Please let me know if I missed something.
edit: cd git dir.
submitted by AmbitiousSpeed0 to Bitcoin [link] [comments]

HD address generation seems to work in bitcoin 0.13.0rc1 :-)

"The only people who should be running fully synchronizing nodes are miners and businesses and uber-geeks like theymos who enjoy fiddling with technology."
Gavin Andresen
Compiled bitcoin-0.13.0rc1 from source on Ubuntu.
Like in older versions, there was no menu visible in bitcoin-qt (it was in the binaries) but I finally solved it through:
sudo apt-get remove appmenu-qt5
I then added the following code:
https://github.com/bitcoin/bitcoin/pull/8206/files
so I could dump the extended private master key (xprv....)
and recompiled.
To dump the wallet (that here includes the master key):
In bitcoin-qt: click help, then choose console
walletpassphrase passphrasehere 60
dumpwallet filename
I then checked some of the addresses generated in bitcoin-qt here:
https://github.com/bip32JP/bip32.github.io
Substituting the BIP32 Extended Key and using:
Custom Path: m/0'/0'/0' (for the first address, etc.)
THEY AGREED!
(edit: and also the private keys)
Thanks, core developers and especially:
Jonas Schnelli
It's nice not having to worry anymore if the backup of your (encrypted) wallet.dat file has become outdated.
submitted by sumBTC to Bitcoin [link] [comments]

Litecoin Compilation Guide Linux Ubuntu 16.04

If you are on Linux Ubuntu 16.04, follow those steps (cut and paste one line at a time in a new Terminal window):
\*** ensure that the system is up to date ***** sudo apt-get update sudo apt-get upgrade sudo apt-get dist-upgrade sudo apt-get autoremove sudo reboot
\*** download the source code ***** mkdir Github && cd Github sudo apt-get install git git clone https://github.com/litecoin-project/litecoin cd litecoin
\*** Install the dependencies ***** sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev sudo apt-get install bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev sudo apt-get install libboost-program-options-dev libboost-test-dev libboost-thread-dev sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev sudo apt-get install libqrencode-dev protobuf-compiler miniupnpc
\*** To install the deprecated version of Berkeley DB 4.8 ***** sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8+±dev
\*** Compile ***** ./autogen.sh ./configure make
\*** Optional ****** sudo make install
\*** Execute ***** cd ~/Github/litecoin/src/qt ./litecoin-qt
submitted by senisende to litecoin [link] [comments]

IRC Log from Ravencoin Open Developer Meeting - Aug 10, 2018

[16:01] <@Wolfsokta> Todays topics: DGW implementation, segfault, Q&A, feedback on IRC
[16:01] <@Wolfsokta> Just to set the stage here, this is a developer meeting where developers that have contributed source code to the Ravencoin project can meet and chat about items they are working on. Please be respectful to one another. For the sake of staying on target, please limit interactions to questions and comments on code or projects that you are working on. Any time left over at the end can be opened up for general Q&A.
[16:02] <@Wolfsokta> FYI - I'm RavencoinDev, and lets get started.
[16:03] <@Wolfsokta> @Tron, can you talk about where we are at with DGW on testnet and mainnet?
[16:03] <@Tron> Sure.
[16:03] can someone volunteer to take notes and post also?
[16:03] <@Tron> We are building binaries that will activate DGW-180 at block 338778
[16:04] <@Tron> It looks back 180 blocks to calculate the diff.
[16:04] I will copy the text from the meeting into a file that can be archived later. I can also make summary notes after like BTC core does.
[16:04] I'll save a log of the whole meeting and can post it on the subreddit thread.
[16:04] <@Wolfsokta> We have setup testnet4 in order to test the new binaries.
[16:04] great
[16:05] <@Wolfsokta> We plan to release the binaries later today.
[16:05] @Tron have you looked into the timestamp attack concerns of DGW?
[16:05] https://github.com/zawy12/difficulty-algorithms/issues/30
[16:06] <@Tron> Yes. And for that reason, we've tightened up the timestamps that will be accepted for valid blocks.
[16:06] <@Tron> Moved from 2h to 12 minutes.
[16:06] nice
[16:06] Oh wow okay
[16:06] <@Tron> Its also the reason we went from 60 blocks (lookback) to 180 blocks.
[16:07] why would 2h ever be acceptable? lol
[16:07] 2h was originally used for daylight savings shenanigans I believe
[16:07] <@Tron> It was from bitcoin, and it factors in clock skew, and variance in finding blocks on 10 minute intervals, and block propagation time.
[16:07] makes sense
[16:08] what about the segmentation fault when reindexing?
[16:08] any fix yet?
[16:08] @Tron 12 minutes seems to be pretty small window for clock skew
[16:08] I assume it was chosen due to 1/10th scaling from BTC?
[16:09] <@Wolfsokta> Not yet ruski, we'll cover that in a bit.
[16:09] <@Tron> We did divide existing by 10.
[16:10] <@Wolfsokta> Any further questions about DGW on testnet or on mainnet?
[16:10] What block is it activating on mainnet?
[16:10] <@Wolfsokta> 338778
[16:11] And will there be the need to update binaries twice (for DGW fork and asset layer fork)?
[16:11] <@Tron> We are activating DGW by block height because headers sync first, and the BIP9 activation flag sets a flag, and we need to look at either block height or version to know which diff algo.
[16:11] <@Wolfsokta> Calculated to be near the end of the month so we have some time with DGW on testnet.
[16:11] Someone on discord asked this a while back, but why Was DGW chosen over something like digishield or anyother algo
[16:11] <@Tron> And block version can be changed (tampering) and still make it on the chain.
[16:12] Binaries will need to be updated as more asset layer stuff get completed and tested. Not by the end of the month though.
[16:12] <@Tron> We looked at DGW and LWMA. LWMA has a lot of constants that must be tuned right.
[16:13] <@Tron> We were impressed with the amount of work on LWMA to analyze how it responds, but it wasn't straightforward to understand the nuances of how/why it works.
[16:13] zawy was in the #development channel on Discord. He's an expert on DAAs. I'm sure he would help with tuning LWMA if you asked.
[16:14] <@Tron> Either will be much better that what we have. Even at the extremes, it will adjust smoothly.
[16:14] Are there any issues or comments on the DGW code that should be addressed?
[16:14] @devs in general
[16:15] <@Wolfsokta> Thanks @brianmct, we did look extensively at the DGW code to ensure we weren't going to see the same issues that happened to Verge.
[16:16] so i guess you would have to make way more blocks with false timestamps to be able to exploit our version of dgw right?
[16:16] because of the 12 minute timestamp thing?
[16:16] <@Wolfsokta> With X16R, and with the changes Tron talked about we feel confident that this will address the swings without being able to be exploited.
[16:17] nice
[16:17] @russki Yeah, pretty much.
[16:17] verge is a different type of situation - but overall asics and mining are a risk always
[16:18] <@Wolfsokta> Okay, anything else on the difficulty targeting change?
[16:19] <@Wolfsokta> Cool, blondfrogs wanted to talk about subassets that were added.
[16:19] ooh yeah i saw those github commits
[16:19] looking good
[16:19] We also want to let everyone know that you can now create sub assets with the new binaries that will be posted soon. You can create these subassets using the issue rpc call. Qt will be built shortly. This will allow users to make an asset PARENT
[16:20] <@Wolfsokta> Basic overview. If you own an asset you can create sub-assets by including a '/
[16:20] nice
[16:20] And then make any of the following PARENT/A PARENT/B .... PARENT/Z
[16:20] <@Tron> We'll post a FAQ on assets later today.
[16:21] <@Wolfsokta> And it only is 100 Raven for a subasset
[16:21] on testnetv4 it still says asset activation status: waiting
[16:21] why?
[16:21] <@Tron> Yep, it needs to be voted in.
[16:21] <@Wolfsokta> We wanted to test the BIP9 activation process again as well. The more testing the better.
[16:21] We wanted to make sure that we follow the same process the Mainnet is going to go through.
[16:21] ok nice
[16:22] <@Wolfsokta> Any questions about subassets?
[16:23] are they unique?
[16:23] <@Tron> No
[16:23] <@Wolfsokta> Yes, they behave the same way as a normal asset, just live under an owned asset.
[16:23] <@Tron> Maybe I misunderstood the question. Unique with parent.
[16:23] Each subasset can have their own number issued? So PARENT/A can have 1,000 and PARENT/B can be 50?
[16:23] yes
[16:23] oooh ok that makes more sense
[16:23] <@Wolfsokta> Exactly thanks traysi
[16:24] <@Tron> And, not the same thing as "Unique Assets"
[16:24] <@Wolfsokta> The individual unique asset support is included in an upcoming phase.
[16:25] Moving onto the Segfault issue ----------------------->>>>>>>>>>> SEGFAULT
[16:25] Are we able to changes the properties of subassets after they have been created? Or is something like that specified when creating them?
[16:25] <@Tron> Yes
[16:25] can sub-assets be reassigned to other addresses while retaining control of the parent asset elsewhere?
[16:25] So basically it has all the features of a normal asset, but live under an asset's top-level namespace?
[16:25] satoshi corbie @russkidooski
[16:25] So basically it has all the features of a normal asset, but live under an asset's top-level namespace?
[16:26] <@Tron> Sub-assets are identical to assets after creation.
[16:26] <@Tron> Just cheaper to create, and in your "owned" namespace.
[16:26] Okay cool
[16:26] will subassets eventually have a unqiue tag? eg ASSET/SUB:1
[16:26] We have found an issue with our testnet binaries and are still looking to the issue. The issue presents itself when a user performs a reindexing of the chain. We think we have pinpointed the where the problem is and are currently working a fix. This fix will be out shortly.
[16:26] plan is to make default reissue=true and units=0 and allow increase in units on reissue
[16:26] How much is it going to be for a sub-asset?
[16:27] 100
[16:27] <@Wolfsokta> Okay, let's now focus on the SegFault issue that was discovered by Under.
[16:28] do you know what the issue was?
[16:28] <@Wolfsokta> It seems to be a build problem with the boost library.
[16:28] Still looking into though. :)
[16:29] <@Wolfsokta> We have been able to reproduce it on linux internally with 2.0.3
[16:29] yea i get the same issue on windows 10
[16:30] I saw a Bitcoin thread a while back about the seg fault error. I had it because I had conflicting versions of BDB
[16:30] static compiled on ubuntu 18.04
[16:30] <@Wolfsokta> We really appreciate you guys pulling down master and helping test.
[16:30] @Trap we will look into that also
[16:30] no problem, im just curious lol
[16:32] <@Wolfsokta> We haven't been able to build a windows version that doesn't have the segfault issue.
[16:32] <@Tron> We're dropping Windows support ;)
[16:32] lol
[16:33] Just finished setting up a new Windows test environment so we can test and validate the solution as we are working on it.
[16:33] The bdb issue is a known issue that has been around for some time. We are pretty certain it is a boost library issue, and are working quickly to get a windows build that fixes the issue.
[16:34] what did you guys do to fix the linux version?
[16:34] Once we have binaries for all supported platforms ready, hopefully tonight. No promises. We will make an announcement
[16:34] The issue has been fixed on Linux and Mac though?
[16:34] (oops sorry already answered)
[16:34] <@Wolfsokta> If anybody else gets there first with Windows please let us know what you found.
[16:34] Built the binairies on a Ubuntu 16.04 box.
[16:34] that was it?
[16:35] Yeah, we think so. 16.04 has boost 1.58 which seems to fix the issue. The build on 18.04 use boost 1.67 which seems to cause the issue.
[16:35] is there a boost 1.58 repo on 18.04?
[16:35] 18.04 used 1.65***
[16:36] I've built with boost 1.68 on arch Linux
[16:36] It worked
[16:37] wallet 2.0.x?
[16:37] @Trap, the issue is when -reindex is used.
[16:37] Oh sorry my bad
[16:37] Wallet 2.0.3
[16:38] <@Wolfsokta> For those that joined late we're discussing https://github.com/RavenProject/Ravencoin/issues/208
[16:38] 1 sec im going to boot into ubuntu and try compiling with 1.58 on 18.04
[16:39] Any other questions pertaining to the segfault?
[16:40] <@Wolfsokta> Alright, thanks everybody. Before we start the Q&A I would like to get some quick feedback on using IRC for this meeting.
[16:41] If we're going to use IRC we should take some measures to at least hide people's IPs when they join
[16:42] Yea. It is very hard to read this back.
[16:42] Also no message history
[16:42] If you disconnect and reconnect
[16:42] <@Tron> I'll throw in a vote for Discord.
[16:43] <@Wolfsokta> If you use a decent IRC client instead of the website it's not bad.
[16:43] Some of us used a VPN before we connected to IRC
[16:43] If needed we can restrict channel to Developer roles, etc for the developer meeting and open it up for general Q&A
[16:43] https://www.strawpoll.me/16247952
[16:43] poll
[16:43] Make a discord when only mods can submit links
[16:43] Where*
[16:45] Discord won the poll 5 to 2
[16:45] <@Wolfsokta> There are also a lot of IRC tools that can be used to track the meetings.
[16:45] we know
[16:46] <@Wolfsokta> We also want any developer to be able to speak.
[16:48] <@Wolfsokta> We're open to try Discord next week.
[16:48] <[kai]> perhaps you could even get a feed from this irc to discord?
[16:49] <[kai]> a feed would enable discordians to view the chat, but only contribute if they take the extra steps to come here.
[16:49] <@Wolfsokta> That's a good idea kai... Has anybody seen that working?
[16:50] <[kai]> https://github.com/reactiflux/discord-irc
[16:50] <[kai]> im sure you could make this a one way deal.
[16:51] <@Wolfsokta> I like that idea, let's try that for next week. So we'll meet here in IRC again, but it should be broadcast to Discord.
[16:53] <@Wolfsokta> Okay, we'll go with IRC next week with the broadcast to discord and re-visit for next week.
[16:54] <@Wolfsokta> Okay, let's do open Q&A for the next few mins.
[16:54] <[kai]> just a quickey, more for my curioisty, did you look at digishield?
[16:54] <[kai]> DGW solution seems solid.
[16:55] <[kai]> was just curious if it was one of the four solutions you looked at.
[16:55] <@Wolfsokta> Tron is answering... Any others Q?
[16:55] <@Tron> We briefly looked at Digishield, but our analysis was between DGW and LWMA.
[16:55] <[kai]> right on.
[16:56] <[kai]> cheers guys, see you next time.
[16:56] OPen the gates for the last 4 minutes for any other questions?
[16:58] <@Wolfsokta> Alright, thank you all for being here today and please join the development effort with us. If you have an idea, or a fix for an issue write it up and submit a pull request.
[16:59] <@Wolfsokta> Thanks again for all those that have contributed their time and effort to make Ravencoin successful. We have the BEST community.
[16:59] ^
6:59] You devs are pretty cool
[16:59] did the burn get discussed?
[16:59] <@Wolfsokta> Special thanks to Bruce, really glad you could make it with the short notice.
[17:00] <@Tron> Thanks everyone!
submitted by __pathfinder__ to Ravencoin [link] [comments]

The Qtum Test Network has been RELEASED!

The Qtum Test Network Has Been Released:
https://github.com/qtumproject/qtum/releases/tag/testnet-sparknet
Instructions on how to compile from source are listed in the Git. Please see the documentation provided:
Quickstart Build on Ubuntu This is a quick start script for compiling Qtum on Ubuntu sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev # If you want to build the Qt GUI: sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler git clone https://github.com/qtumproject/qtum cd qtum # Update cpp-ethereum submodule git submodule update --init --recursive # Note autogen will prompt to install some more dependencies if needed ./autogen.sh ./configure make -j2 
If you would like to receive Test Network tokens, please PM this account with your address and we will get them sent ASAP. These test tokens will have no value, so you are free to share them with others for testing. We will have a faucet set up shortly, along with a Win64 QT shortly.
Right now the team is preparing for our launch event in Shanghai, so it may be a touch busy on our side for the next day.
Visit the Qtum Website: https://qtum.org/en/ Join the Qtum Slack: https://qtumslack.herokuapp.com/
submitted by Vindyne8 to icocrypto [link] [comments]

The Qtum Test Network has been RELEASED!

The Qtum Test Network Has Been Released:
https://github.com/qtumproject/qtum/releases/tag/testnet-sparknet
Instructions on how to compile from source are listed in the Git. Please see the documentation provided:
Quickstart Build on Ubuntu This is a quick start script for compiling Qtum on Ubuntu sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev # If you want to build the Qt GUI: sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler git clone https://github.com/qtumproject/qtum cd qtum # Update cpp-ethereum submodule git submodule update --init --recursive # Note autogen will prompt to install some more dependencies if needed ./autogen.sh ./configure make -j2 
If you would like to receive Test Network tokens, please PM this account with your address and we will get them sent ASAP. These test tokens will have no value, so you are free to share them with others for testing. We will have a faucet set up shortly, along with a Win64 QT shortly.
Right now the team is preparing for our launch event in Shanghai, so it may be a touch busy on our side for the next day.
Visit the Qtum Website: https://qtum.org/en/ Join the Qtum Slack: https://qtumslack.herokuapp.com/
submitted by Vindyne8 to BitcoinAll [link] [comments]

The Qtum Test Network has been RELEASED!

The Qtum Test Network Has Been Released:
https://github.com/qtumproject/qtum/releases/tag/testnet-sparknet
Instructions on how to compile from source are listed in the Git. Please see the documentation provided:
Quickstart Build on Ubuntu This is a quick start script for compiling Qtum on Ubuntu sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev # If you want to build the Qt GUI: sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler git clone https://github.com/qtumproject/qtum cd qtum # Update cpp-ethereum submodule git submodule update --init --recursive # Note autogen will prompt to install some more dependencies if needed ./autogen.sh ./configure make -j2 
If you would like to receive Test Network tokens, please PM this account with your address and we will get them sent ASAP. These test tokens will have no value, so you are free to share them with others for testing. We will have a faucet set up shortly, along with a Win64 QT shortly.
Right now the team is preparing for our launch event in Shanghai, so it may be a touch busy on our side for the next day.
Visit the Qtum Website: https://qtum.org/en/ Join the Qtum Slack: https://qtumslack.herokuapp.com/
submitted by Vindyne8 to altcoin [link] [comments]

The Qtum Test Network has been RELEASED!

The Qtum Test Network Has Been Released:
https://github.com/qtumproject/qtum/releases/tag/testnet-sparknet
Instructions on how to compile from source are listed in the Git. Please see the documentation provided:
Quickstart Build on Ubuntu This is a quick start script for compiling Qtum on Ubuntu sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev # If you want to build the Qt GUI: sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler git clone https://github.com/qtumproject/qtum cd qtum # Update cpp-ethereum submodule git submodule update --init --recursive # Note autogen will prompt to install some more dependencies if needed ./autogen.sh ./configure make -j2 
If you would like to receive Test Network tokens, please PM this account with your address and we will get them sent ASAP. These test tokens will have no value, so you are free to share them with others for testing. We will have a faucet set up shortly, along with a Win64 QT shortly.
Right now the team is preparing for our launch event in Shanghai, so it may be a touch busy on our side for the next day.
Visit the Qtum Website: https://qtum.org/en/ Join the Qtum Slack: https://qtumslack.herokuapp.com/
submitted by Vindyne8 to CryptoCurrency [link] [comments]

The Qtum Test Network has been RELEASED!

The Qtum Test Network Has Been Released:
https://github.com/qtumproject/qtum/releases/tag/testnet-sparknet
Instructions on how to compile from source are listed in the Git. Please see the documentation provided:
Quickstart Build on Ubuntu This is a quick start script for compiling Qtum on Ubuntu sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev # If you want to build the Qt GUI: sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler git clone https://github.com/qtumproject/qtum cd qtum # Update cpp-ethereum submodule git submodule update --init --recursive # Note autogen will prompt to install some more dependencies if needed ./autogen.sh ./configure make -j2 
If you would like to receive Test Network tokens, please PM this account with your address and we will get them sent ASAP. These test tokens will have no value, so you are free to share them with others for testing. We will have a faucet set up shortly, along with a Win64 QT shortly.
Right now the team is preparing for our launch event in Shanghai, so it may be a touch busy on our side for the next day.
Visit the Qtum Website: https://qtum.org/en/ Join the Qtum Slack: https://qtumslack.herokuapp.com/
submitted by Vindyne8 to CryptoCurrencies [link] [comments]

Very Simple Instructions - Ubuntu GUI Wallet

I believe the developers did their best with the time and resources they had, but they missed a few things. One of them is a working wallet for Ubuntu 13.10 (perhaps other revisions, but this is what I use). Well I managed to get it compiled from source and thought others could benefit from me sharing the instructions.
How to Build the Maxcoin Wallet GUI on Ubuntu 13.10
Based upon the developers instructions posted here Linux Build Guide
Start in your home directory (or wherever you want your wallet binary)
cd ~
Install the required tools
sudo apt-get install git-core build-essential libssl-dev libboost-all-dev libdb5.1-dev libdb5.1++-dev libgtk2.0-dev libminiupnpc-dev qt4-qmake mingw32 synaptic qt-sdk qt4-dev-tools libqt4-dev libqt4-core libqt4-gui libdb++-dev
Create the final destination of the source code. I like a simple directory structure
mkdir maxcoin
Grab the source code from the repository
git clone https://github.com/Max-Coin/maxcoin.git
Enter the directory
cd maxcoin
First compile the command line version (sanity check of sorts)
cd src
Execute the make command
make -f makefile.unix
Now to build the gui
cd ..
(you should be in ~/maxcoin/maxcoin)
qmake
execute the next command (it will fail)
make
The failure I got was:
"src/qt/bitcoin.cpp:5:24: fatal error: QApplication: No such file or directory #include ^ compilation terminated. make: *** [build/bitcoin.o] Error 1"
This is where I expect most people get frustrated and start hitting the keyboard. The fix is actually very simple. The problem is that Ubuntu uses qt5 by default, but the wallet is built around qt4. So lets tell Ubuntu to use QT4
qmake-qt4
now execute the make command
make
Viola! You now have a maxcoin gui wallet.
I am sorry if this does not perfectly meet the preferred formatting for instructions. Please share with me ways to improve it and I happily will.
Maxcoin donations are graciously accepted: mY6JCZR4DuMxm1NMvw4yxgovmfHhjo5snt
tldr: Follow developers instructions but don't use qmake, instead use qmake-qt4
submitted by deer_headlights to maxcoin [link] [comments]

Cannacoin 0.8.7.1 Updates coming soon! Development/Beta Support needed!

I have been working hard on updating the Cannacoin protocol/client to version 0.8.7.1 (to be called Version 2.0) which will bring us up to date with crypto standards and also patch OpenSSL heartbleed. Following open source standards I want the new updates to be public and available for peer review before implementing. If there is anyone with development backgrounds or with history working with the Bitcoin/Litecoin/Cryptocurrency protocol that wish to help with build support and testing please contact me to join to project. As it stands, the source is completed and builds are compiling without problems, we just need some more eyes and people that have a technical background who can help with build support. Here's a few sneak peeks to get you excited for what's to come:
Edit: Here's some notes from the teams development log as it pertains our Cannacoin 2.0 protocol/wallet updates. (as of 5/24)
Completed:
To Do:
Note: The "Cannacoin 0.8.7.1" github repoistory will be merged alongside the main "Cannacoin" repoistory as a seperate branch (Version 2.0.0.0) after peer review.
submitted by SubCreative to cannacoin [link] [comments]

How to Install Bitcoin Core Wallet on Ubuntu 16 How compile qnapi 0.2.1 in Ubuntu 14.04 LTS with Qt Creator CryptoCurrency Altcoin Creation using Windows Enviroment Qt Installation Ubuntu Kurulumu Compiling Bitcoin Core Source Code - 2017 debian/ubuntu/linux with Music

After struggeling with the dependencies for a while, I finally managed to compile Bitcoin-Qt on my Ubuntu machine. I used the following commandos for compiling: ./autogen.sh ./configure -with-gui ... Compile Bitcoin on Ubuntu 14.04. GitHub Gist: instantly share code, notes, and snippets. It is far better to compile bitcoin by your own and then use it. In this post, I will explain how to compile bitcoin source code on Ubuntu 16.04 LTS. I will be running my Ubuntu instance on AWS though you can follow the same instructions anywhere on Ubuntu 16.04 LTS. Please make sure your server has at least 4 GB of RAM. I am assuming the ... In this post, I will explain how to compile bitcoin source code on Ubuntu 16.04 LTS. I will be running my Ubuntu instance on AWS though you can follow the same instructions anywhere on Ubuntu 16.04 LTS. Please make sure your server has at least 4 GB of RAM. I am assuming the username is “ubuntu” (without double quotes) but if your username ... How to : Compile a QT-Wallet under Ubuntu by antho281 · Published November 3, 2015 · Updated November 3, 2015 To install a QT-Wallet under Linux, open a Terminal and use the following commands.

[index] [40817] [12097] [11541] [13] [31979] [21188] [49567] [13884] [51392] [30577]

How to Install Bitcoin Core Wallet on Ubuntu 16

Use the VanityGen tool to generate a Bitcoin address that stands out from the others. Decide for yourself the first part of the address, and have an address ... Bitcoin Trading for Beginners ... Mineable 258,738 views. 22:12. Compiling Bitcoin Core Source Code - 2017 debian/ubuntu/linux with Music - Duration: 23:33. Bilal Haider 5,971 views. 23:33 ... Follow along at home with the code in our GitHub repository: https://github.com/turtlecoin/turtlecoin Thanks for watching :) Hope you join our community! ==O... This short video shows how to compile the bitcoin source code on linux (ubunu). an easy task to do but it take some time (around 15 min) please read the instruction in the official github https ... This video Shows how to Compile Bitcoin Source Code on Linux operating systems. it covers almost everything on how to compile bitcoin source code. Build Bitc...

#